qr code

QR Code for a Restaurant Menu: Static vs Dynamic, and How to Update It Without Reprinting

How to make a menu QR code for your restaurant or cafe, pick static or dynamic, host the menu so it reads well on a phone, and change it without reprinting a single table card.

Kelvin Amoaba9 min read

  • qr code
  • restaurant
  • menu
  • small business
  • guide

Menus change all the time. Prices go up, a supplier runs out, the summer specials end. If the QR code on your tables points at last month's PDF, you either reprint every table card or live with a menu that's wrong.

This guide covers how to set up a restaurant menu QR code so that never happens: where to host the menu, whether you need a static or dynamic code, how to print it, and how to change the menu later without touching the tables.

We make iShortn, a link shortener with free dynamic QR codes. The steps work with most QR tools, and we'll say plainly where you don't need ours.

The short version

  1. Put your menu online at a link that opens well on a phone.
  2. If that link will never change, a free static QR code is fine.
  3. If the link might change (new PDF each season, a new ordering platform, a different file for lunch), use a dynamic QR code so you can repoint it without reprinting.
  4. Print it big enough, test it on real tables, and keep a few paper menus for guests who'd rather not scan.

Step 1: Put your menu online

A QR code doesn't hold your menu. It holds a link. So the first job is to give the menu a home. You have four common options:

Where the menu lives Good for Watch out for
A page on your own website Fast to load, easy to read, good for Google Someone has to update the page
A PDF (Google Drive, Dropbox, your site) Quick if your menu already exists as a design file PDFs are often hard to read on a phone. Drive links need "Anyone with the link" access
Your ordering or delivery platform Guests can order from the table Platform fees, and the link changes if you switch platforms
A menu builder tool Nice layouts with no design work Some lock the menu or QR code behind a subscription

Whatever you pick, open the link on your own phone over mobile data, not Wi-Fi, before you go further. If you have to pinch and zoom to read the prices, guests will too.

PDF tips if you go that route: export one menu section per page, use a large font, and keep the file small (under about 2 MB) so it loads on a weak signal.

Step 2: Static or dynamic QR code?

This is the decision that matters most.

A static QR code encodes your menu link directly in the pattern. It works forever, needs no account and costs nothing. But it can never change, and it can't count scans. If the link it contains stops working, the code is dead.

A dynamic QR code encodes a short link. The short link forwards to your menu. Because the forwarding happens on a server, you can change where it goes at any time, and every scan gets counted. The downside is that it depends on the provider: if they shut the short link off, the code stops working. That's how a lot of "expired" menu codes happen. Some generators disable codes when a free trial ends. (More on that in why QR codes stop working.)

So which one?

  • Static is fine when your menu is a page on your own website at a fixed address (yourcafe.com/menu) and you update the page itself. The link never changes, so the code never needs to.
  • Dynamic is the better choice when your menu is a file whose link changes when you upload a new version (most Google Drive and Dropbox setups), when you might switch ordering platforms, or when you want to know how many people actually scan.

Our free QR code guide covers the general difference between the two types. For menus, the question to ask is: will the link inside this code ever change? If you're not sure, go dynamic.

Step 3: Make the code

Option A: a static code (no account)

Use our free QR code generator. Paste your menu link, check the preview and download the PNG. No sign-up, no ads, and the code doesn't expire.

Option B: a dynamic code you can update

In iShortn:

  1. Create a free account (link at the end of this post) and go to QR Codes.
  2. Create a new code and paste your menu link as the destination.
  3. Name it clearly, for example "Menu - tables". If you also want a code for the window or takeaway bags, make those separately (more on that below).
  4. Style it: colours, pixel and corner shapes, and your logo in the middle if you like. Keep dark on light and good contrast. A pale code on a dark wooden table card is the most common reason menu codes fail to scan.
  5. Download the PNG and send it to your printer or drop it into your table card design.

On the free plan you get 5 dynamic QR codes. They never expire and show no ads, and you can edit the destination whenever you like. Each code also uses one of your 30 free links that month. Free scan analytics show the last 7 days and count up to 1,000 events a month; codes keep working past that, but new scans aren't recorded until the month resets. Pro is $8/month if you need more codes or the full scan history.

Step 4: Print it so it scans

Most menu-code problems are printing problems. Before you order 40 table cards:

  • Size. On a table card read from about 30 to 40 cm away, make the code at least 3 to 4 cm wide. Bigger is safer, especially in dim light.
  • Quiet zone. Leave a clear margin around the code. Don't let a border, pattern or text touch it.
  • Finish. Glossy laminate reflects overhead lights straight into the camera. Matte laminate scans more reliably.
  • Words. Add a line like "Scan for our menu" or "Menu and today's specials". A bare square on a table gets ignored, or mistaken for a payment code.
  • Wi-Fi. If mobile signal is poor inside, print the guest Wi-Fi details on the same card.
  • Test the real thing. Print one card, put it on a table at night with the lights you actually use, and scan it with an iPhone and an Android phone.

Keep a few paper menus too. Some guests don't have a phone with them, some have a flat battery, and some just prefer paper. A QR menu works best as the default option, not the only one.

Step 5: Update the menu without reprinting

This is the reason to go dynamic. When the menu changes:

  1. Upload the new menu wherever it lives. If it's a new PDF with a new link, copy that link.
  2. In iShortn, open the QR code and edit the destination URL.
  3. Save. The next guest who scans the same printed card gets the new menu.

Test it with your phone straight away. If you're using Google Drive, check the new file's sharing setting is "Anyone with the link". A private file is the most common reason an updated menu shows a sign-in screen.

A few ways restaurants use this:

  • Seasonal menus. Swap the PDF four times a year; the table cards stay the same.
  • Special events. Point the code at a set menu for Christmas week, then switch back.
  • Temporary closures or changes. If the kitchen is closed for a day, point the code at a short notice page.
  • Switching platforms. If you move from one ordering platform to another, update the link once and you're done.

Step 6: See which codes get scanned

Every scan of a dynamic code is counted, so you can answer questions that used to be guesswork:

  • How many tables actually use the QR menu? If scans are low, guests may be asking for paper menus, or the code may be hard to spot.
  • When do people scan? Scans over time show your busy periods.
  • Which placement works? Use separate codes for separate places: one for tables, one for the front window ("See our menu"), one on takeaway bags ("Order again"). Five free codes are enough for most cafes.

The analytics show totals, time, location and device, not who scanned. For more on reading scan numbers and tagging menu links for Google Analytics, see how to track QR code scans.

While you're printing table cards

Table cards have room for one more code, and the best use of it is reviews. Guests waiting for the bill have a minute free, which is when they're most likely to leave one. Our guide to a QR code for Google reviews shows how to set that up. Label both codes clearly so nobody scans "reviews" looking for the dessert list.

Quick answers

Is a restaurant menu QR code free? Yes. A static code from our QR code generator is free with no account. Dynamic codes are free on iShortn's free plan (5 codes), with editing and scan counts.

Can I change a QR code after it's printed? Only if it's dynamic. A static code's link is fixed in the pattern. If your printed code is static and the link inside it still works, keep that link working. If the link is dead, you'll need to reprint, ideally with a dynamic code this time.

Does iShortn host my menu? No. iShortn makes the QR code and forwards scans to wherever your menu lives: your website, a PDF or an ordering page.

Will my menu code expire? iShortn's free dynamic codes don't expire and don't need a paid plan to keep working. Check this with any other generator before you print. Many disable codes when a trial or subscription ends.

Get your menu code

If your menu link will never change, grab a static code and you're done. If it might change, spend two minutes on a dynamic one now so you don't have to reprint 40 table cards later.

Create a free dynamic QR code for your menu →

5 dynamic QR codes on the free plan, editable at any time, with scan analytics, no ads and no expiry date.

Smarter, simpler link sharing

  • Free forever plan
  • No credit card required
  • Cancel anytime